A connection to what comes next.
Make cloud connectivity part of your network design. Start with the providers you use, the services you need to reach, and the capacity your workloads require.
From $1,000 / month
Explore latency and reachability from Stealth NYC to public business application and cloud service endpoints.
Explore Business Platforms
- Your networkOffice
- StealthCloud Connect
- Your workloadsCloud providers
- Ethernet & IP
- Layer 2 / 3
- Connection capacity
- 1 to 800 gigabits per second
- Published pricing term
- 12 months
- Cloud workloads
- Connectivity between offices and cloud providers
- Hybrid network planning
The connection.
The particulars.
- Connection
- Private Layer 2 Ethernet or Layer 3 IP
- Capacity
- Symmetric; dedicated; 1:1 load factor
- Topologies
- Point to point or point to multipoint
- VLANs
- Transparent IEEE 802.1Q tags
- Multicast
- Supported; transport independent of protocol
- Quality of service
- No overbooking; guaranteed QoS across the connection
- Latency
- Defined for the ordered endpoints and route; see the NYC network SLA below
- Optical transport
- Dedicated wavelengths
Your cloud.
Your connection.
Stealth reaches the listed providers through private and public peering.
Layer 2 Ethernet and Layer 3 IP are service options, distinct from the peering connection to a provider. Your proposal confirms the handoff, provider, region, routing and any access required to private cloud resources.
| Provider / destination | Published Layer 2 / Ethernet option | Published Layer 3 / IP option |
|---|---|---|
| Amazon AWS | Available | Available |
| Apple iCloud | Not listed | Available |
| Dropbox | Not listed | Available |
| Google Cloud | Available | Available |
| IBM Bluemix (SoftLayer) | Available | Available |
| Microsoft Azure | Not listed | Available |
| NASDAQ NY Area | Available | Not listed |
| Salesforce.com | Not listed | Available |
A blank option on the published matrix is shown as “Not listed.” The listed options do not identify a provider-branded private interconnect or establish access to a private VPC or virtual network.
The latency SLA applies to the defined network endpoints within NYC. It does not measure cloud application response time or promise the same latency to every cloud region.
A clear view
of the cost.
From $1,000 / month
| Data rate | Monthly fee / physical connection | Typical installation |
|---|---|---|
| 1 Gbps | $1,000 | $1,500 |
| 10 Gbps | $1,500 | $1,500 |
| 100 Gbps | $3,000 | $3,000 |
| 400 Gbps | $5,000 | $10,000 |
| 800 Gbps | $8,000 | $20,000 |
12-month term. Flat monthly rate per physical connection. USD. Confirm provider reachability and service scope in your proposal.
Performance.
In writing.
The applicable agreement defines measurement and service remedies.
- Availability
- ≥ 99.995%
- Packet loss
- ≤ 0.01%
- Mean time to repair
- 4 hours
- Network latency within NYC
- ≤ 1.5 ms
- Termination without penalty after three SLA violations in any window of 90 days.
Before we connect.
Which cloud providers can I reach?
Contact Stealth with your provider, region, and required connection type. Current reachability must be confirmed for your service design.
Are cloud provider charges included?
Ask for a proposal that identifies Stealth service charges and any separate cloud provider charges or requirements.
Plan your cloud connection.
Tell us which locations and cloud services you need to connect. We’ll discuss capacity, design and the next steps with you.
You do not need to know your bandwidth yet. This is an inquiry; sending it does not place a service order.